by David Cribb
(Port St John FL USA)
Engine only runs for a few seconds when you spray ether in the carb, I know you are not supposed to use ether but running out of ideas. I have replaced the fuel hose and bulb. Know I am getting fuel to the fuel pump which is also new. When I pump the bulb and crank the engine it spins fast enough to start but I get nothing. Have also rebuilt all three carbs. Open the drain screw and fuel pours out so I know fuel is in the carb. Checked the compression and I have 125, 115 and 130 so it is good. Put in new plugs and have plenty of spark. Still nothing any Ideas.